Electronics Store - Computer Peripherals - Components - Motherboard

• Without yellow pre-soldered header. Luckfox Pico is a cost-effective Linux micro development board, based on the Rockchip RV1103 chip to provide a simple and efficient development platform for developers; Supports a variety of interfaces including MIPI CSI, GPIO, UART, SPI, 12C, USB, etc., which is convenient for developing and debugging quickly.
• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 4-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in RISC-V MCU supports low power consumption and fast start-up, supports 250ms fast picture capture and loading AI model library at the same time to realize face recognition \"in one second\". Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths. Integrated with built-in POR, audio codec and MAC PHY

• Examples: https://github.com/espressif/esp-dev-kits/tree/master/esp32-c3-lcdkit
• Please contact sales@espressif.com if you have further business or technical questions.

• Note: This item does not come pre-assembled, header soldering required. Battery must be purchased separately.
• Versatile ESP32 SOC With Dual Core Xtensa 32 bit LX7 Processor
• Newest SX1262 LoRa Radio Delivering Proven Reliability and Performance
• Wifi, Bluetooth 5, and LoRa Providing Unparalleled Connectivity
• 0.96 Inch 128x64 OLED Display Onboard For Easy Monitoring and Debugging
• Builtin SH1.25 Battery Interface With Battery Management System

• Ultra Low Power SoC with Single Core CPU
• Supporting IEEE 802.11b/g/n (2.4 GHz Wi Fi) and Bluetooth 5 (LE)

• Super USB interface Mach3 motion control card, free drive, simple configuration and good compatibility. Especially designed for notebook and tablet PC
• Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor
• The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device
• Support for Limit Switch: Support for limit switch .Support for connecting electronic handwheel .4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
• Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device?

• The working voltage of this relay module board is 12V DC and the standby current is 11mA. Under MODBUS command mode, this relay module can support up to 64 devices in parallel.
• MODBUS commands can be done in HyperTerminal serial (serial assistant) or enter \"Modbus Poll\", and MODBUS RTU command control mode, the maximum delay is 255 seconds.
• MODBUS (HEX) command mode, can control a variety of ways: Serial Hyper Terminal Control (need to manually add the CRC), Modbus Poll software control (software automatically adds the CRC), PLC or MCU process control.
• This relay module has 6 commands: \"Open\", \"Close\", \"Momentary\", \"Self-Locking\", \"Interlock\" and \"Delay\".
• We strive to provide you with the highest quality product and best customer experience. If you are not completely satisfied, please feel free to contact us at any time.

• Features: M.2 Slot (M-Key) for 2280 NVMe SSDs M.2 Slot (B-Key) for 4G LTE Modules Nano-SIM Card Slot 100-Mbit Ethernet Port (w/ 802.3at Power-over-Ethernet) 10-Pin GPIO Header Rigid-Flex FPC Cable for connection to VIM3 / Edge-V Power Output: 24W (12V, 2A) via USB-C port or VIN connector POE Active LED 4G Active LED
• Compatibility: VIM3 (Full-Featured, PCIe x1 Lane) Edge-V (SSD-only, PCIe x4 Lane)
• VIM3 can simultaneously use both Ethernet ports (1Gbit & 100Mbit), when connected to the M2X Extension Board
• Khadas M2X Extension Board
• Edge-V can only use the SSD feature, when connected to the M2X Extension Board. The Ethernet port can receive electrical power, but no network data input.

• 18 Pin: Replacement TPM 2.0 module chip 2.0mm pitch, 2x9P, 18 pin security module for ASROCK motherboards. Built in support for memory modules higher than DDR3!
• Reserved Memory: Standard PC architectures reserve a certain amount of memory for system use, so the actual memory size will be less than the specified amount and the supported state may vary depending on the motherboard specification.
• Supported Systems: TPM module support for 7 64 bit, for 8.1 32 64 bit, for 10 64 bit.
• Applicability: The TPM2.0 encryption security module is available for ASROCK for 11 motherboards. Some motherboards require the TPM module to be inserted or updated to the latest BIOS to enable the TPM option.
• Secure Storage: The TPM is a standalone encryption processor connected to the motherboard's daughter board. The TPM securely stores an encryption key that can be created using encryption software ( for for BitLocker). Without this key, the content on the user's PC will remain encrypted and protected from unauthorised access.

• Package include: 5 x Development Board
• Advantage: Ultra-fine production process, fine parts, no need to worry about the service life.
• Size: approx.5.56x2.14cm/2.19x0.84in
• The GND is changed to 5V B9 5V GND, which can directly connect a small steering gear without additional wiring and reduce development time.
• Application: Can provide a platform for beginners, in practical applications, it will not be because of insufficient computing power, I0 port function is not comprehensive and hinders development

• 100% Brand new and high quality.
• This product are tested before shipping.
• Please make sure you are buying from GinTai.
• Special skill and techniques required for proper installation.
• Easy for you replace your faulty,cracked or broken one ,seller remind that you should replace this in the off state.

• Neato Botvac D3 Connected PCB Main Board
• Includes Ribbon Cable
• Compatible with D3 + others

• 12TH & 13TH GEN CORE - The PRO H610M-E is a compact Micro-ATX motherboard outfitted with the Intel H610 chipset (LGA 1700, 12th & 13th Gen Core); The VRM features MSI Core Boost technology for improved stability & performance
• PASSIVE & AI COOLING - A chipset heatsinks provide passive cooling; Frozr AI cooling automatically adjusts system fan settings based on CPU & GPU temperatures
• DDR5 MEMORY, PCIe 4.0 x16 SLOT - 2 x DDR5 DIMM slots with Memory Boost isolated circuitry for overclocking (1DPC 1R, 5600 MHz); Primary PCIe x16 slot supports PCIe 4.0 (64GB/s) and includes Steel Armor
• GEN3 M.2 SSD STORAGE - The M.2 Gen3 x4 32Gb/s slot is designed to maximize NVMe based SSD performance; SSD storage reduces loading time
• WELL CONNECTED - Network hardware includes a 1Gbps LAN controller; Rear ports include USB 3.2 Gen 1 Type-A (5Gbps), HDMI 1.4 and VGA, and 7.1 HD Audio with Audio Boost

• This is D1 mini, it is a mini NodeMcu Lua WiFi board based on ESP-8266EX.
• 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0); 1 analog input(3.2V max input). Micro USB connection; Compatible with Arduino; 1MB Flash; 500mA resettable fuse.
• WIFI development board,4M bytes.5V 1A switching power supply (switching power supply?onboard.
• Our D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE.
• Type-C ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F

• 100% Brand new and high quality.
• This Product Are Tested Before Shipping.
• Easy for you replace your faulty,cracked or broken one ,seller remind that you should replace this in the off state.
• Please feel free to contact us if you need to place bulk order, we will give you best wholesale price.
• Product quality and after-sales service only come from Huasheng Suda

• USB Type C Port Reinforced-This is latest the USB type C port reinforced and make it more stronger solder points.
• microcontroller-The ProMicro is similar to the Pro Mini. The USB type C transceiver inside the 32U4 allows us to add type C connectivity on-board and do away with bulky external type C interface.
• Multi-channels-This tiny little board does all of the neat tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.
• Voltage regulator-There is a voltage regulator on board so it can accept voltage up to 9V DC.The maximum voltage allowed on the RAW pin is 9V, 6-7V input recommended. If you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.
• Anti-ESD PackageThe boards came in a box package with a pinout diagram printed on, each in their own anti-ESD(Electronic Static Discharge) bag with 3 rows of header pins.

Popular Categories on BuyBestBrands.in