Electronics Store - Computer Peripherals - Components - Motherboard

• Please Note: Standard PC architecture reserves a certain amount of memory for system use, so the actual memory size will be less than the specified amount.
• Independent Processor: The TPM is an independent cryptographic processor that connects to the motherboard's daughter board.
• Safe Storage: The TPM securely stores encryption keys that can be created using encryption software such as Win BitLocker.
• Wide Compatibility: This 4 Pin SPI module supports Win 7 64 bit, Win 8.1 32/64?bit, Win 10 64 bit. Actual performance may vary depending on your system configuration.
• For Win11: This TPM2.0 Cryptographic Security Module is suitable for GIGABYTE Win 11 motherboards. Some motherboards require the TPM module to be plugged in or updated to the latest BIOS to enable the TPM option.

• Complete Outboards and Stern Drives Lower Unit Cooling Water Pump Repair Parts
• Impeller Kit Fit Mercury Mariner and Force 65-225 HP Motors and MerCruiser MC-1 R MR Alpha One Gen 1 and Pre Alpha Drives
• It meets mercury marine original equipment manufacturer specifications to best protect your mercury mariner outboard or MerCruiser stern drive
• Replace 46-96148A8, 46-96148T8, 18-3316, 46-96148A5, 46-60367A1, 46-78400A2, 46-73804A3, 46-73802A3, 46-69222A3, 46-64141A11, 46-60367A4, 46-58618A4, 46-57234A3, 46-48747A3, 46-42579A4, 46-44292A4, 46-32437A1
• Contains 47-89984 Water Pump Impellers Pump upper Housing 46-96148A1 Gaskets +Plate +Orings Water Tube 23-29804, Gasket, Grommet, Seal Ring, O-Ring, Impeller key and Screw same to picture 1 shown
• VERY IMPORTANT- Same horsepower and year, different model, It may have a totally difference. Please check your outboard model, serial number and year before place the order. You can ask us questions if you are not sure, we would pleasure to help you.
• Advice: Check your water pump impeller every season, and replace it every two to three seasons,in order to ensure that engine to run smoothly.

• Equipped with the most cost?effective CPLD chip, greatly reducing development costs.
• Suitable for embedded system development with higher work efficiency, brings you more convenience.
• Made of superior quality PCB board with stable performance, have a longer service time.
• Low working voltage requirements, making the work and use extremely convenient.
• Treatment by sophisticated production, efficiently keep the board from wiring failure.

• WIDE APPLICATION SUPPORT AND COMPATIBILITY: Designed with a 14-pin interface, our 14pin TPM 2.0 module is fully compatible with motherboards and compatible with 11 operating system. Enjoy seamless integration and compatibility
• ENHANCED SECURITY WITH TPM 2.0: Experience great security with our TPM 2.0 encryption security module. This standalone encryption processor, connected to a daughter board and motherboard, ensures your data remains protected at all times
• SECURE STORAGE FOR PEACE OF MIND: Our TPM 2.0 module allows you to utilize encryption keys generated by software like BitLocker. Without the key, the content on your PC remains encrypted, safeguarding it against unauthorized access
• CRYPTOGRAPHIC PROCESSOR FOR VERSATILE USE: Our TPM 2.0 remote card serves as a trustworthy cryptographic processor that enables key generation, storage, and restrictions. Perform cryptographic operations with ease and confidence
• STABLE PERFORMANCE AND LONG-LASTING DURABILITY: Our TPM SPI module is designed for stable and efficient performance, ensuring seamless . Its user-friendly interface and exceptional durability guarantee a and long-lasting experience

• Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing
• It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port
• Raspberry Pi Pico GPIO Expansion Board is used to break outall the pins and power of the Raspberry Pi Pico development board via male or female headers
• Raspberry Pi Pico GPIO Expansion Board allows the user to connect it to other components with the help of a jumper wire
• Raspberry Pi GPIO Expansion Board is specially made to work with the Raspberry Pi Pico Board

• 1.5inch RGB OLED display Module for Raspberry Pi/Arduino/STM32
• 128x128 pixels, 16-bit high color, SPI interface
• Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
• 128x128 high resolution, 65K colors, clearly displays colorful images
• Driver: SSD1351

• 0.08mm ultra-fine copper wire
• High-density nylon braid with great durability and excellent flexibility
• Oxygen-free copper wire, film coated to prevent oxidation
• Each wire individually sleeved in black or black & white
• Compatible with all PSUs
• Each extension cable includes 4 cable combs

• The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible.
• There are no official release of the specs for the USB 3.1 header yet (as of this writing), But first motherboard with this is the ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G etc.The cable only support usb3.1/usb3.0 device, it can't work at USB2.0(480Mbps)
• USB 3.1 require a different front panel header than USB 3.0.
• Connector 1: USB 3.0 Front Panel Header
• Connector 2: USB 3.1 Front Panel Header
• Length: 20cm
• Material: plastic
• Color: black

• Supports AMD 1st and 2nd generation Ryzen/ Ryzen with Radeon Vega graphics processors.iTE I/O Controller Chip
• Dual channel non-ECC unbuffered DDR4, 4 DIMMs
• HDMI, DVI D ports for multiple display
• PCIe Gen3 M.2 NVMe
• High quality audio capacitors and audio noise guard
• RGB fusion supports RGB LED strips in 7 colors
• Realtek Gigabit LAN
• Smart fan 5 with fan stop
• CEC 2019 ready

• This is a 1.5 inch OLED display module of 128x128 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current
• Working without backlight, the OLED display module could give out light by itself
• In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD
• OLED display module also has a much faster response time than an LCD
• The display with small dimension is suitable for MP3, function cellphone, smart health device, etc

• Intel LGA 1200 socket: Ready for 11th Gen Intel Core processors
• 5X Protection III: all-round protection with LANGuard, DRAM overcurrent protection, overvoltage protection, SafeSlot Core safeguards and stainless-steel back I/O
• ASUS OptiMem: ASUS OptiMem proprietary trace layout allows memory kits to operate at higher frequencies with lower voltages to maximize system performance
• Ultrafast connectivity: PCIe 4.0, 32Gbps M.2 slot, Intel 1 Gb Ethernet and USB 3.2 Gen 1 Type-A
• Comprehensive cooling: PCH heatsink and Fan Xpert

• Backplate Shield

• The 160-degree wide-angle lens can capture a large area of the scene within a short shooting distance and is suitable for photographing large scenes such as architecture and scenery.
• This camera module is designed for NVIDIA Jetson Nano Board and Raspberry PI CM3.
• The camera is capable of 3280 x 2464 pixel static images, and also supports 1080p @ 30fps, 720p @ 60 fps and 640 x 480 p 60/90 video recording.
• It is widely used for AI intelligent recognition, face recognition, road identification line recognition, license plate recognition, etc.
• Note: For Raspberry PI, this camera module only compatible with Raspberry PI CM3, other version is not supported. If you have any other questions about the product, please feel free to contact us.

• Supports Intel Core 14th/ 13th /12th processors
• Dual Channel Non-ECC Unbuffered DDR4, 2 DIMMs
• 6+1+1 Hybrid Digital VRM Design
• GbE LAN with Bandwidth Management
• NVMe PCIe 3.0 x4 M.2
• DisplayPort / HDMI / DVI-D / D-Sub Ports for Multiple Display
• High Quality Audio Capacitors and Audio Noise Guard
• Smart Fan 6 Features Multiple Temperature Sensors , Hybrid Fan Headers with FAN STOP
• GIGABYTE APP Center, Simple and Easy Use
• Anti-Sulfur Resistors Design

• acrylic material, transparent and more fashion.
• Easy to install, for ITX motherbard.
• Open delivers better performance on cooling, compatibility and maintenance.
• Convenient for testing, overclockingOpen delivers better performance on cooling, compatibility and maintenance. or gaming; Support longer graphic card.
• This case has enough space for any big sized parts needed for the PC.

Popular Categories on BuyBestBrands.in