Electronics Store - Computer Peripherals - Components - Motherboard

• ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.
• ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware; It's a IOT unit with all available resources on board, support smart link and smart networking.
• Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
• Smart hardwares easily, if you want to do some remote control projects, the cheap but useful NodeMCU board can help you. the embedded MCU and wifi functions let us be able to remotely control our hardwares.
• DIY a smart car : If together with the motor or servo extension board, one can diy a smart robot, e.g., rc car, tank chassis.

• STM32F103C8T6 ARM STM32 Minimum System Development Board Module
• Board of MCU-based basic circuits, such as a crystal oscillator circuit, USB interface and USB power management circuits, and so on.
• Use the current smart phones of Mirco USB interface, easy to use, USB communication and power supply can be done.
• Equipped with high quality 1*40/2.54mm spacing of single rows of pins, ensuring excellent conductivecontact
• The Board lead to all the I/O resources.Download with SWD debug interface, which requires a minimum of 3 wires to complete debug a download task

• Skill Level: Beginner Provides a starting point to go beyond the capabilities of the micro:bit.
• Three different boards that can be kept as a whole or broken apart for individual use!
• Includes Temperature sensor board (MCP9700), light sensor board (TEMT6000), and RGB LED board
• Snap the board apart by twisting each of the boards side to side until it pops out
• There are power tabs available on the two sensors and the LED if you choose to break it apart.

• This Product Are Tested Before Shipping
• Easy For You Replace Your Faulty,Cracked Or Broken One ,Seller Remind That You Should Replace This In The Off State
• Brand New And High Quality
• Product Quality And After-Sales Service Only Come From Zahara
• Feel Free To Contact Us If You Need To Place Bulk Order, We Will Give You Best .

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
• I2C controlled, using only 2 pins.Reserved I2C control pins, allows to work with other control boards.Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
• Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal). Servo voltage: 5V.Logic voltage: 3.3V.
• Driver: PCA9685. Control interface: I2C. Dimension: 65mm x 30mm. Mounting hole size: 3.0mm.
• Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control)

• The ASUS Prime H510M-E motherboard is designed to support latest Intel Socket LGA1200 for 11th Gen Intel Core processors & 10th Gen Intel Core. The board is PCIe 4.0 Ready supporting up to 64GB DDR4 3200MHz(OC) of memory and Intel Turbo Boost Technology to push your experience to its peak.
• The board features the most comprehensive cooling options ever that are configurable via Fan Xpert 2+ or the UEFI BIOS. It employs stronger PCH heatsink. These comprehensive cooling options are controllable and configurable via Fan Xpert 2+ software.
• Enjoy extended connectivity with the next-gen technology of PCIe 4.0, 32Gbps M.2 slot, Intel 1 Gb Ethernet and USB 3.2 Gen 1 Type-A. With the integration of LANGuard gives advanced signal-coupling technology and premium anti-EMI surface-mounted capacitors to improve throughput.

• ATmega328 microcontroller with Optiboot (UNO) Bootloader. Rev3 shield compatible.
• Program with a USB Micro-B cable using the Arduino IDE platform: Plug in the board, select ?Arduino UNO and you?re ready to upload code
• Hardware peripherals you know and love: 20 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts
• Broken out the SDA, SCL and IOREF pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC
• The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can't hook it up wrong.

• Brand new
• Easy for you replace your faulty,cracked or broken one ,seller remind that you should replace this in the off state.
• Please check the Model Number of your device before purchasing this Item. You can find the Model type of your device on your device and / or in the settings.
• Professional skill is highly recommended, installation instruction is not included

• Microprocessor: ESP32 (dual-core 32-bit MCU + ULP core), wprk for the development environment;
• Onboard Wi-Fi, Bluetooth 2.4GHz PCB antenna;
• Onboard 0.96\" 128*64 dot matrix OLED display, which can be used to display debugging information, battery power, and other information;
• Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing;
• Micro USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures; Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).

• Manufacturer : Element14

• Support Intel Core 14th/ 13th/ 12th Gen Processors, Intel Pentium Gold and Celeron Processors for LGA 1700 socket
• Supports DDR4 Memory, up to 3200(MAX) MHz
• Core Boost : With premium layout and digital power design to support more cores and provide better performance
• Memory Boost: Advanced technology to deliver pure data signals for the best performance, stability and compatibility
• Lightning Fast Experience: PCIe 4.0. Audio Boost: Reward your ears with studio grade sound quality

• ATSAMD21G18 32-bit/48MHz ARM Cortex-M0+. 4MB Flash Memory. 32KB SRAM. 32KB of EEPROM (emulated in Flash).
• 26 GPIO Count. 14 ADC Channels at 12-bit Resolution. Analog-to-Digital and Digital-to-Analog Converters (ADC & DAC).
• Vin: 4.2V-6.0V for charger - otherwise 3.5V-6.0V. VBATT: 3.7V Lipo VCC: 600mA @3.3V.
• Compatible R3 Layout. Integrated USB Controller. RGB LED. Program in Arduino IDE Platform or with Python.
• UF2 Bootloader. Qwiic Connector. Does not include Qwiic cables.

• ESP8266 @ 80MHz with 3.3V logic/power 4MB of FLASH (32 MBit) Built in WiFi 802.11 b/g/n
• CP2104 USB-Serial converter onboard with 921600 max baudrate for uploading
• 9 x GPIO pins - can also be used as I2C and SPI
• 3.3V regulator with 500mA peak current output
• Measures 2.0\" x 0.9\" x 0.28\" (51mm x 23mm x 8mm) without headers soldered in Light as a (large?) feather - 9.7 grams

• Display Area: 43.2(W)X57.6(H)mm
• With touch pen inside, support touch screen function, more easily to use.
• Compatible with arduino r3 controller board, which will improve your project operations.
• Designed with a SD card socket on the back.
• SPI serial, built-in ILI9341 driver IC and power supply IC.

• Compatible with Macbok Pro 13'' A1278 2008 series ONLY. (for Macbok 13-inch Late 2008 Aluminum)
• Replacement and high quality, Replace your faulty, Cracked or broken Touchpad.
• Compatible part Number (s): 922-9014, 821-0647-B.
• Compatible Model No: Unibody-A1278, MB466LL/A *, MB467LL/A *.
• Each Pack come with 1x Touchpad Sensor Module. (NOT included Ribbon Flex Cable)

Popular Categories on BuyBestBrands.in