Electronics Store - Computer Peripherals - Components - Motherboard

• 24

• Product parameters: USB interface supports download (DFU download, not a serial port) OLED interface one plug and play Support 0.96-inch OLED TFT LCD interface Connect to a 1.44-inch full-color LCD Connect to 1.8-inch full-color LCD Data storage: W25032 High-speed crystal: 25MHz Low-frequency crystal: 32.768K Power + Programmable LED light User and reset buttons All CPU-10 lead out 2.54mm integer multiple pitch pins
• Describe The STM32F411CE development board is based on a high-performance Arm Cortex-M4 32-bit RISC core running at up to 100 MHz. The Cortex-M4 core has a floating-point unit (FPU) single-precision and supports all ARM processor's single-precision data processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) for enhanced application security.
• ARM processor is a low-power cost RISC microprocessor. The full name is Advanced RISC Machine. The ARM processor itself is a 32-bit design but is also equipped with a 16-bit instruction set, which generally saves up to 35% over the equivalent 32-bit code, but retains all the advantages of a 32-bit system.
• The three major features of the ARM processor are low power consumption and strong functions, 16-bit/32-bit dual instruction set, and suitable for STM32F411CE core board/development board. 1. Small size, low power consumption, low cost, high performance; 2. Support Thumb (16-bit)/ARM (32-bit) dual instruction set, which can be well compatible with 8-bit/16-bit devices; 3. A large number of registers are used, and the instruction execution speed is faster;
• The STM32F411CE microcontroller is suitable for a wide range of applications: Motor drive and application control Industrial application: PLC, inverter, circuit breaker Printer and scanner alarm system, video intercom system, and HVAC Home Audio Equipment Cell Phone Sensor Hub

• Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing
• It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port
• Pico Zero Board provide long term safe, compact and convenient housing to your DIY circuits
• 6 x 20 grid for raspberry pi pico
• Pico Zero Board is specifically made to work with the Raspberry Pi Pico Board

• High Resolution: This 3.5inch TFT LCD Module is equipped with high resolution, Resolution reaches to 480 x 320, Controller ili9481 ili9468, ili9488 hx8357, or r61581.
• TF Card Socket: Designed with a TF(Micro SD) card socket on the back of board so that you can conveniently insert a card.
• Sensitive Touch Screen: Support touch screen function. Sensitive and nimble, provides you a sensitive and smooth using experience.
• Cost-Effective: 3.5 inch lcd touch screen with a touch pen. Compatible with Mega2560 development board directly, no any wiring needed.

• 74

• Brand new and high quality
• New 2.8-inch serial color LCD module with touch with at least 9 IO drivers Resolution 240*320
• With PCB plate (including power supply IC, SD), compatible with 5110 interface
• Driver IC: ILI9341
• Package included: 1*240X320 Resolution 2.8\" SPI TFT LCD Display Touch Panel

• Supports 10th Gen Intel Core processors
• Dual Channel Non-ECC Unbuffered DDR4
• 8-Channel HD Audio with High Quality Audio Capacitors
• Ultra-Fast M.2 with PCIe Gen3 X2 & SATA Interface
• GIGABYTE Exclusive 8118 Gaming LAN with Bandwidth Management
• HDMI /DVI-D/D-Sub Ports for Multiple Display
• Smart Fan 5 features Multiple Temperature Sensors and Hybrid Fan Headers with FAN STOP
• GIGABYTE APP Center, Simple and Easy Use
• Anti-Sulfur Resistors Design

• Supports 10th Gen Intel Core Processors
• Dual Channel Non-ECC Unbuffered DDR4, 2 DIMMs
• 8-Channel HD Audio with High Quality Audio Capacitors
• Ultra-Fast M.2 with PCIe Gen3 X4 & SATA Interface
• GIGABYTE Gaming GbE LAN with Bandwidth Management
• HDMI /DVI-D/D-Sub Ports for Multiple Display
• Smart Fan 5 features Multiple Temperature Sensors and Hybrid Fan Headers with FAN STOP
• GIGABYTE APP Center, Simple and Easy Use
• Anti-Sulfur Resistors Design

• Wide Compatible: The computer memory tester is fully compatible with all DDR4 motherboards from for
• Scope of Application: The computer memory tester with LED is used to repair motherboard failures such as no boot, no display, and no memory reading
• Forward and Reverse: The motherboard tester supports forward and reverse slot interfaces, which meet your different daily needs
• Indication Light: The desktop mainboard board tester with LED uses the light emitting diode on and off to indicate the open circuit and short circuit of the data line address line and other
• Pay Attention: Due to the difference in motherboard design and chipset, some may be displayed differently. Please use the same motherboard to check the fault

• Cable is 7 inch long.
• This product are tested before shipping.
• Please make sure you are buying from GinTai.
• Special skill and techniques required for proper installation.
• Easy for you replace your faulty,cracked or broken one ,seller remind that you should replace this in the off state.

• Lightweight

• The WeMos d1 mini ESP32 Pro development board, everything needed to program the latest ESP32 module (the ESP-WROOM-32), ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino.
• Different than ESP8266 Mini V2 and ESP8266 D1 Pro, the ESP32 D1 carries the ESP32-WROOM-32 module while keeping the same form factor.
• The DOIT esp32 devkit is a single chip solution that combines Bluetooth and 2.4 GHz Wi-Fi capabilities.
• The WeMos mini d1 family of boards is one of the latest additions to the ESP32- and ESP8266-based Internet Of Things (IoT) ecosystem.
• Together with a growing set of expansion boards (shields), the WeMos family is a great solution for building projects quickly using both the ESP8266 and ESP32 SoC.

• Equipped with ESP32-S2-WROVER,small-sized ESP32-S2 based development board.
• Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2-Saola-1R on a breadboard.
• only supports ESP-IDF master or version v4.2 and higher.
• ESP32-S2 Saola 1R is a powerful, generic Wi-Fi MCU module that integrates ESP32-S2. It has a PCB antenna, a 4 MB external SPI flash and an additional 2 MB PSRAM.

• 100% Brand new and high quality
• This Product Are Tested Before Shipping
• Easy for you replace your faulty,cracked or broken one ,seller remind that you should replace this in the off state.
• Special skills and techniques required for proper installation.
• Product quality and after-sales service only come from Zahara

Popular Categories on BuyBestBrands.in